Mapei Fiberplan - PALLET DEAL - 50 units
Mapei Fiberplan is used for interior levelling, smoothing and removing differences in thickness from 3 to 10 mm on properly fixed timber substrates and wooden boards, where good resistance to loads and traffic is required. Fiberplan is suitable for wheeled chair traffic and for underfloor heating systems.
Ultra-fast hardening self-levelling fibre reinforced smoothing compound
Fiberplan is used for interior levelling, smoothing and removing differences in thickness from 3 to 10 mm on properly fixed timber substrates and wooden boards, where good resistance to loads and traffic is required. Fiberplan is suitable for wheeled chair traffic and for underfloor heating systems.
Fiberplan can only be used internally.
Some application examples:
- Smoothing old and new timber floors, floor boards, chip-board panels, plywood, parquet.
- Smoothing cementitious, terrazzo, old ceramic tiles, and natural stone substrates.
Additional info...
ECHNICAL CHARACTERISTICS
Mapei Fiberplan is a grey coloured powder consisting of special cements with rapid setting and hydration, synthetic fibres, graded silica sand, resins and special additives prepared according to a formula developed in the Mapei research laboratories.
Fiberplan, when mixed with water, produces a very smooth easily workable paste, perfectly self-levelling, with high adhesion to the substrate and extremely rapid drying.
Fiberplan can be spread in thicknesses from 3 mm to 10 mm per coat without shrinkage, cracking and crazing, and develops very high compressive and flexural strength, as well as resistance to indentation and abrasion.
It is possible to proceed with the installation of floorings approximately 24 hours after spreading Fiberplan, depending on the ambient temperature and humidity, regardless of the thickness.
RECOMMENDATIONS
- Do not add more water to the mix that has already begun to set.
- Do not add lime, cement or gypsum to the mix.
- Do not use for exterior levelling work.
- Do not use on substrates that are subject to continuous rising damp.
- Do not apply another coat of Fiberplan after the previous one has completely dried: in this case first apply a primer based on Primer G (1 part Primer G to 3 parts water).
- Do not use on metal surfaces.
- Do not use Fiberplan in temperatures below +5°C.
CONSUMPTION
Consumption of Fiberplan is 1.6 kg/m2 per mm of thickness.
PACKAGING
Fiberplan is available in 25 kg bags.
STORAGE
Mapei Fiberplan, stored in a dry place, is stable for at least 12 months.
Online brochure available
 | Click here to view |
You may also be interested in ...
No documents found.
Comments...
Write a comment